top of page
This is a listing for a handcrafted Crystal Focus v7.5 (by Plecter Labs) powered LED saber. We call it the "Master's Resurgence"!


Authentic Custom Machined Hilt. Hand-Tooled out of T-6061 Aluminum. Hilt is 1.40" OD and is approximately 10.5" in length.
Powder Coated to translucent black chrome and trans-copper.
1" OD; 34" thick-walled polycarbonate blade by Dark Force Custom Sabers
x2 illuminated momentary switches, (Red is primary ignition/deactivation; Blue is the auxiliary switch for switching sound banks etc.)
Tri-Cree XPE-2 LED using 2 Green LEDs and 1 single White LED for the Flash on Clash.
Crystal Focus v7.5 soundboard by Plecter Labs. Includes 12 default sound fonts.
Board is fully customizable and programable to users desires (soundfonts, boot sounds, sensitivity settings, etc.)
Custom PVC chassis.
2.1mm Recharge port.
7.4v @ 1500mah 18500 Li-Ion battery pack
4ohm 2W speaker
Includes alternate thumbscrew, killkey, and 7.4v Li-Ion Charger.

"Master's Resurgence" (Crystal Focus v7.5 Powered ) *SOLD*

Out of Stock
  • Extreme 


    Not associated with LUCASFILM LTD.™ or any LFL Ltd.™ Film or Franchise.


    RETURNS: Buyer has 14 days after receiving the item to return it for: money back. Buyer pays for shipping. Product MUST be in working condition. 



    A) All sabers designed, illuminated and parts that are modified by Dark Force Custom Saber LLC are covered against:

        1. Defects in workmanship and are covered for a period of 30 days from the date of purchase. (This does not include PVC sabers which are only 14 days)

        2 Normal wear and tear which includes but not limited to: NORMAL wear and tear and proper use of saber.

           Normal and proper use of saber is dependent of type of saber purchased from Dark Force Custom Sabers LLC. And it is the customers responsibility to know the limitations of the saber before they purchase a specific saber.


    B) Items NOT covered under warranty are as follows:

        1. Blades and tips

        2. Damage to saber due to misuse, recklessness or abuse, (throwing, running over, beating trees, etc..) Most sabers can withstand heavier dueling, so keep it to dueling. This DOES NOT include PVC sabers, they are to be used ONLY for light to medium dueling or cosplay.

        3. ALL shipping to and from customer is not covered and is customers full responsibility.

        4. ANY sabers PVC or Metal that have been torn apart, or have been attempted to be worked on by customers is NEVER covered and voids the warranty. 

       5. Defective components such as speakers, LEDs, or sound cards. Customer will be charged per component. Customers within warranty dates will not be charged labor of the repair.  Every saber leaves Dark Force Custom Sabers in working-functional condition guaranteed.

       6. If customer makes a clam that none of the above has happened and I receive the saber in a condition that otherwise shows or makes me believe otherwise, the saber will not be covered and customer will be charged a rate of $40 and hour plus parts to fix damaged saber. 

       7. Saber is only warranted under the name of the original customer. 


    Every saber leaves Dark Force Custom Sabers in working-functional condition guaranteed.

    All our sabers made of aluminum are made by us on our machines  and are not cnc machined

    so therefore are not flawless so expect them to have flaws, some of which are for design purposes.


bottom of page